What is *BGS?

On the eve of Pratley's 60th Anniversary, we finally reveal the meaning of those three letters on the back of every Pratley Adhesive pack.

Pratley Job Opportunities

Well qualified and experienced professionals are currently required to fill key Pratley positions.


 

 
 
Products - Electrical - Electrical Junction Boxes

Note: For detailed product information, click the product image or the product name. (underlined product names only)

Pratley Aluminium Alloy Cable Box

Click for detailed information

Certification
DIP/HSP
IP68
SANS 969
SANS 60529
  • SUITABLE FOR USE IN ZONE 21 & 22
  • SABS TEST REPORT No. 787/82383/G298.

  • Complies with SANS 969 & SANS 60529
  • IP68
  • For Zone 21 and 22 locations.
  • DIP/HSP
  • Supplied complete with earth terminal, nickel plated built in cable glands and inner seals
  • For surface applications only

Pratley Aluminium Alloy No.0 Instrumentation Cable Box

Click for detailed information

Certification
DIP/HSP
IP68
SANS 969
SANS 60529
  • SUITABLE FOR USE IN ZONE 21 & 22
  • SABS TEST REPORT No. 787/82383/G298.

  • Complies with SANS 969 & SANS 60529
  • IP68
  • For Zone 21 and 22 locations.
  • DIP/HSP
  • For use in terminating extra small diameter unarmoured instrumentation cables.
  • Accommodates cables ranging from 3mm to 6mm diameter

Pratley Aluminium Alloy Conduit Box

Click for detailed information

  • Box accepts 20mm Conduit directly
  • Shrouds are not required

Pratley Aluminium Alloy Foundation Boxes (Epoxy coated) - for Service Connections

  • Supplied complete with built in gland and shroud
  • Conduit is fitted to back entry of Foundation Boxes by means of a Locknut in the back entry
  • The Pratley Newcastle Box is a No.2 single entry box for SWA cable with a 25mm hole in the back.

Pratley Aluminium Alloy Boiler Element Box (Epoxy coated)

  • 77mm diameter hole and 55 mm diameter retained slotted metal washer at the back of this box allows for easy fitting of a boiler or geyser element

Pratley Aluminium Alloy Cable to Conduit Adapter Box

  • This 2 way box accepts cable into one glanded entry
  • Epoxy Coated
  • Can also be used as a top entry foundation box
  • Supplied complete with built in gland and shroud.

Pratley Aluminium Alloy Roof Connector Box

  • For overhead service connections
  • 60 Amp. 250 Volt Single Phase
  • Supplied complete with Terminal Connectors and Insulating Sleeves for installation on corrugated or box section roof of galvanised iron or asbestos cement
  • Refer to Sales Leaftlet No. 9314

Pratley Aluminium Alloy Industrial Light Fitting

  • Fitted with E.S Lamp holders
  • Will accommodate 10mm2 x 4 core, 6mm2 x 4 core, 4mm2 x 4 core and 2.5mm2 x 4 core SWA cables.
  • Pratley will gladly fit these to cable for our customers. Price subject to quotation.

Pratley Aluminium Alloy Industrial 16 Amp Socket Fitting

  • Fitted with 3 pin socket to accept plug-in fluorescent lamp units and standard 16 amp plugs
  • Uses the same shrouds as the Aluminium Alloy Industrial Light Fitting

« Back

Top of Page


Home - Contact Us - Products - Exports
This webpage was last updated on May 12, 2008
© 2008 Pratley (Pty) Ltd. All rights reserved.