Waterproofing Shrouds


|
-
Short Shrouds are for use with Pratley Adjustable, Flameproof cable glands, Ex e cable glands, Aluminum Alloy Cable Boxes and Ezee-Fit Cable Boxes
-
Long Shrouds are for use in corrosive environments with Pratley Adjustable Cable glands only
|
|
| Inner Seal Kits for Pratley Adjustable Cable Glands

|
-
Seals pressure tight against cable bedding
-
Fitted with a nipple gasket and shroud
-
Will maintain IP68 rating if fitted with a nipple gasket and shroud
|
|
| Compression Conversion kit for Pratley Adjustable Cable Glands

|
|
|
| Adaptors for Pratley Adjustable Cable Glands

|
-
Pg. and Imperial Adaptors
-
Replace the standard nipple in the Pratley Adjustable Cable Gland
-
The gland may then be screwed into Pg. (DIN standard) or Imperial threaded entries respectively
|
|
| Extended Length Nipples for Pratley Adjustable Cable Glands

|
|
|
| Earthing Tags for Pratley Adjustable Cable Glands

|
|
|
| Locknuts (Nickel plated, steel and brass)  
|
-
For use with Pratley Adjustable Cable Glands, Compression Glands, Ex e, Ex e Ultra, Ex e Compression, Enviro and Enviro Compression Glands
-
Note: Unplated brass locknuts can be supplied on special request. Steel locknuts should not be used with single core cable due to heating effects.
|
|
| Adapter Bushes for Flat Twin and Earth Cables

|
|
|
| Asibus Compression Bush for Asibus Cables 
Certification |
Ex d IIB
Ex e I/II
IP68
|
|
SANS 60079-0
SANS 60079-1
SANS 60079-7
SANS 60529
|
-
SANS IEC 60079-0, 60079-1 & 60079-7
-
SUITABLE FOR USE IN ZONE 1 & 2
-
SURFACE AND UNDERGROUND
-
SABS TEST REPORT No. 7234/04-208.
|
| 
|
|
| Replacement Flame-Seal Bush Kits for Pratley Ex d/e Cable Glands

|
-
SABS 10086-1, 10086-2 and the OSH and MSH acts require periodic inspection of equipment installed in hazardous locations
-
These kits are designed as replacements for Ex d glands where inspection has revealed that the integrity of the existing bushes has been compromised
|
|